3.1. Microfoane - Transducer Type - Dynamic, Active; Polar Pattern - Cardioid Power Supply: 48V Phantom Power; Frequency Range From (Hz): 50-20.000 Hz; Sensitivity dBV/Pa; Flat Response Bypass Mode: -59.00, Flat Response +18; Preamp Mode: -41.00, Flat Response +28 Preamp Mode: -31.00; Sensitivity mvpa: 1.12; Impedance (Ω): Bypass Mode: 150 / Preamp Mode: 27; Output Connectors: 3 Pin XLR; Functions: 18/28dB Boost, Preamp Bypass Switch, Presence Boost; Switchable Low Cut: Bass Roll-off Included accessories: Windscreen RK345B (Similar Shure SM7dB)

3.2. Procesor microfon DBX - Microphone Processor Mic Preamp Input Impedance: ~4.2kΩ Mic Preamp gain: 0dB to +60dB Mic Preamp Phantom Power: +48VDC CMRR>40dB, typically 55dB; Mic Preamp max input level 0.2Vrms, Gain = 30dB Mic Preamp Equivalent Input Noise (EIN) -125dBu, 22Hz-22kHz, 150Ω source impedance; Input Impedance (line) 10kΩ unbalanced, 20kΩ balanced Max Input (line) >+21dBu, balanced or unbalanced Input Gain Range(line) -15dB to +45 dB Insert Connector 1/4" TRS: Normalled; tip is Send, ring is Return Insert Distortion <0.01% THD, 20Hz-20kHz, +10dBu Output Connectors 1/4" Balanced/Unbalanced TRS Connectors Output Impedance 100Ω unbalanced, 200Ω balanced Max Output >+21dBu, >+20dBm (600Ω load) Gain Adjustment Range -30dB to +10dB; Noise<-80dBu unweighted (20Hz-20kHz); Both Gain Controls set for 0dB, all processing controls OFF; Frequency Response 20Hz to 20kHz, +0.5, -0.5dB; THD <0.08%THD, 20Hz-20kHz, +10dBu, all Processing Controls OFF; Compressor Threshold Range - 40dBu to +20dBu; Compressor Threshold Characteristic OverEasy®; Compressor Ratio >4:1 For input levels beyond 20dB above threshold Max Compression 30dB; Compressor Attack Time Program-Dependent; >1s for small level increases, down to 10ms for larage increases; Compressor Release Time Program-Dependent; adjustable between approximately 1dB/sec and 75dB/sec; Compressor Distortion Typically <0.05%THD, 20Hz-20kHz, 15dB G/R, De-esser Characteristic Wideband Gain Reduction; De-esser Frequency Range 800Hz to 10kHz High Pass, 12dB/octave De-esser Release Time 12dB/octave Program-Dependent; approximately 1mS/dB Enhancer HF Detail Characteristic Program-controlled shelving equalizer, approximately 15dB maximum HF boost; Enhancer LF Detail Characteristic Bell-shaped boost @ 80Hz, bell-shaped cut @250Hz, ratio is approximately 2:1 Expander/Gate Threshold Range OFF to +15dBu Expander/Gate Ratio Adjustable 1.5:1 to 10:1; Expander/Gate Dynamic Range Typically 105dB; Power Consumption 15W; Operating Voltage 230VAC 50/60Hz; Operating Temperature 0°C to 45°C; Dimensions (4.5cm x 14.6cm x 48.5cm) (Similar DBX-286s)