Axia Fusion Console •12-Position Main frame 1 bucata •Fusion 4-Fader Module 2 bucati •Fusion Monitor/Navigation Module 1 bucata Garanție 2 ani

Powerstation integrated console engine Microphone Preamplifiers  Source Impedance: 150 Ohms  Input Impedance: 4 k Ohms minimum, balanced  Nominal Level Range: Adjustable, -75 dBu to -20 dBu  Input Headroom: >20 dB above nominal input  Output Level: +4 dBu, nominal Analog Line Inputs  Input Impedance: >40 k Ohms, balanced  Nominal Level Range: Selectable, +4 dBu or -10dBv  Input Headroom: 20 dB above nominal input Analog Line Outputs  Output Source Impedance: <50 Ohms balanced  Output Load Impedance: 600 Ohms, minimum  Nominal Output Level: +4 dBu  Maximum Output Level: +24 dBu Digital Audio Inputs and Outputs  Reference Level: +4 dBu (-20 dB FSD)  Impedance: 110 Ohms, balanced (XLR)  Signal Format: AES-3 (AES/EBU)  AES-3 Input Compliance: 24-bit with selectable sample rate conversion, 32 kHz to 96kHz input sample rate capable.  AES-3 Output Compliance: 24-bit  Digital Reference: Internal (network timebase) or external reference 48 kHz, +/- 2 ppm  Internal Sampling Rate: 48 kHz  Output Sample Rate: 44.1 kHz or 48 kHz  A/D Conversions: 24-bit, Delta-Sigma, 256x oversampling  D/A Conversions: 24-bit, Delta-Sigma, 256x oversampling  Latency <3 ms, mic in to monitor out, including network and processor loop Frequency Response  Any input to any output: +0.5 / -0.5 dB, 20 Hz to 20 kHz Dynamic Range  Analog Input to Analog Output: 102 dB referenced to 0 dBFS, 105 dB “A” weighted to 0 dBFS  Analog Input to Digital Output: 105 dB referenced to 0 dBFS  Digital Input to Analog Output: 103 dB referenced to 0 dBFS, 106 dB “A” weighted  Digital Input to Digital Output: 138 dB Equivalent Input Noise  Microphone Preamp: -128 dBu, 150 ohm source, reference -50 dBu input level Total Harmonic Distortion + Noise  Mic Pre Input to Analog Line Output: <0.005%, 1 kHz, -38 dBu input, +18 dBu output  Analog Input to Analog Output: <0.008%, 1 kHz, +18 dBu input, +18 dBu output  Digital Input to Digital Output: <0.0003%, 1 kHz, -20 dBFS  Digital Input to Analog Output: <0.005%, 1 kHz, -6 dBFS input, +18 dBu output Crosstalk Isolation, Stereo Separation and CMRR  Analog Line channel to channel isolation: 90 dB isolation minimum, 20 Hz to 20 kH  Microphone channel to channel isolation: 80 dB isolation minimum, 20 Hz to 20 kHz  Analog Line Stereo separation: 85 dB isolation minimum, 20Hz to 20 kHz  Analog Line Input CMRR: >60 dB, 20 Hz to 20 kHz  Microphone Input CMRR: >55 dB, 20 Hz to 20 kHz Audio Processing Equalizer  Frequency Bands: 20Hz to 320Hz, 125Hz to 2KHz, 1.25KHz to 20KHz.  Cut/Boost range on each band: -25dB to +15dB.  Q-factor: Automatic - bandwidth varies based on amount of cut or boost. Compressor  Threshold: -30dB to 0dB Ratio: 1:1 to 16:1  Post-processor Trim Level: Adjustable from -20dB to +20dB Expander/Noise Gate  Threshold: -50dB to 0dB Ratio: -30dB to 0dB De-esser  Threshold: -20dB to 0dB Ratio: 1:1 to 8:1 Power Supply AC Input, PowerStation Aux & Main  Auto-sensing supply, 90VAC to 240VAC, 50 Hz to 60 Hz, IEC receptacle, internal fuse  Power consumption: 500 Watts Axia Console Power Supply  Add redundant power to PowerStation main without additional IO.  Single-cable connection to PowerStation main provides backup power with automatic switching.  Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz.  Power consumption: 250 Watts. Garanție 2 ani